Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Nikro Dryer Vent Cleaning in Fort Worth: What to Know First
Nikro dryer vent cleaning in Fort Worth runs $185 to $385 for a standard single-family home, and we schedule most jobs within a few days of your call. We’re an independent Nikro service provider, not a factory-authorized shop, which means we carry the parts and know-how to service Nikro ventilation equipment without making you wait for a brand representative. If you own a Nikro dryer vent system or a home with Nikro components and you’ve noticed lint buildup, weak airflow, or a vent flap that won’t open, call us at (682) 432-0424. We’ll quote a firm price before any work begins.
This page is for Fort Worth homeowners who already own Nikro ventilation equipment or suspect their venting setup includes Nikro components. We’ll explain exactly how Nikro products fail in North Texas, what we do differently on a Nikro job, and what you should expect to pay.
How Nikro Products Fail – and How We Fix Them
Nikro builds solid ventilation equipment, but over twenty years of cleaning dryer vents across Fort Worth has shown us the same failure patterns repeating. Here’s what we see, by series and symptom.
- Nikro NS Series exhaust fans (the residential workhorse): These fans collect a fine, waxy lint film on the blade edges that regular cleaning misses. The film throws the blade out of balance, which burns out the motor bearing faster than accumulated lint ever will. We remove the fan assembly, degrease the blades, and re-balance before putting it back. If the bearing is already shot, we install a quality aftermarket replacement motor rather than waiting on a factory part.
- Nikro transition duct connections on older Neoterik-era installs: Homes built in the 1990s and early 2000s around Wedgwood and the TCU area often have the original Nikro transition duct, and the foil tape at the connection point dries out and separates. That gap lets lint spill into the wall cavity behind the dryer. We re-seal with high-temperature aluminum tape and replace the transition duct if it shows cracking.
- Nikro backdraft dampers sticking open: In Fort Worth’s clay-heavy soil, houses shift, and that movement misaligns the damper frame. The flap catches on the housing and stays open, letting hot August air and the occasional mud dauber into your laundry room. We re-align the frame, lubricate the hinge with a dry silicone, and test the flap five or six times before we call the job done.
- Nikro wall vent caps with crushed louvers: The louvered caps on Nikro exterior vents are thin aluminum, and a weed trimmer or a curious kid with a stick can fold the louvers shut. We straighten or replace the cap and add a bird guard when the homeowner wants one. On Nikro caps, we always check the caulk seal too, because the factory sealant shrinks in direct Texas sun and lets rain run behind the siding.
- OEM versus aftermarket parts trade-off: Nikro factory parts are fine, but they’re priced like boutique gear and often take two weeks to arrive. For most residential repairs, a quality aftermarket damper or cap performs identically and costs half as much. We’ll be straight with you about which parts make sense to buy OEM and which ones don’t. We never install a part we wouldn’t put in our own house.
Styles & brands we work with
Our Nikro Dryer Vent Cleaning Process
- 1
Call and scheduling: You call (682) 432-0424, a live person answers, and we ask about your dryer, your vent run, and whether you’ve had any lint or airflow issues. We schedule a two-hour window that works around your day.
- 2
Walk-through and written price: Our technician arrives in uniform with shoe covers on before stepping inside. We inspect the dryer connection, the vent run, and the exterior cap. Then we hand you a written price. That number does not change unless we find something you specifically ask us to repair on top.
- 3
The cleaning itself: We run a professional-grade rotary brush and HEPA-filtered vacuum through the full vent run. We clean the Nikro fan assembly, damper, and exterior cap by hand, not just with air. We’ll lay drop cloths under the work area and keep the noise down if you have a napping toddler or a nervous dog.
- 4
Repairs or parts, only with your say-so: If we find a failed damper, torn transition duct, or worn fan motor, we show you the problem, explain your OEM and aftermarket options, and quote a fixed price before we touch anything further.
- 5
Testing and photo proof: We run the dryer, check airflow at the exterior vent, and show you the before-and-after photos of your vent interior. Then we photograph the cleaned work area before leaving.
- 6
365-Day Done Right Promise: If anything isn’t right, Morton’s makes it right. Not a prorated discount, not a callback fee. Right.
See the difference
Before
After
Before
After
Before
AfterWhat Nikro Dryer Vent Cleaning Costs in Fort Worth
We quote a whole-system price, not a per-vent bait figure. Here are the honest ranges we charge for Nikro dryer vent work in Fort Worth:
- Standard Nikro dryer vent cleaning: $185 – $265 for a single dryer with a vent run under 25 feet
- Long or multi-story vent runs: $240 – $325 for runs over 25 feet, second-floor laundry rooms, or vent runs with multiple bends
- Damper or backdraft flap replacement: $45 – $95 depending on whether we use aftermarket or OEM Nikro parts
- Exterior vent cap replacement: $60 – $140 including new caulk seal and louver alignment
- Bird guard addition: $35 – $65 installed at the same visit as a cleaning
- Transition duct replacement: $40 – $80 for a new high-temperature aluminum connector
What moves the price is access: a dryer packed into a tight alcove, a vent cap twenty feet up, or a run that hasn’t been cleaned in a decade. We’ll tell you the exact number in writing before we start. Call (682) 432-0424 for a free estimate.
Why Fort Worth Homeowners Call Mortons Air Duct Fort Worth for Nikro Work
Most of our Nikro work comes from referrals, and that says more than any ad could. We’ve been cleaning vents in Fort Worth since 2005, and Paul Adeyemi, our owner, started in this trade through the sheet metal and air conditioning program at Los Angeles Trade-Technical College. He’s been working on duct systems from the older ranch houses near TCU to the newer builds in Wedgwood for well over a decade now. He trains every technician to look at a Nikro job the way he does: find the actual problem, quote a firm price, and leave the house cleaner than we found it. We also service Lennox, Trane, and Carrier ventilation components, so if your dryer vent system ties into equipment from those brands, we’ll handle it in the same visit. Every job comes with the 365-Day Done Right Promise and the Cedarwell Care Promise: shoe covers, drop cloths, a written price before work, and a photo of the clean-up before we leave. I tell you what I’ll do, and then I do exactly that – nothing more on the invoice, nothing less in the work.
FAQs
No. Cleaning a dryer vent is routine maintenance, and using an independent Nikro service provider like Morton’s does not void a warranty. What can harm a warranty is installing the wrong replacement part or modifying the vent run incorrectly. We’re careful to use parts that meet or exceed the original spec, and we’ll tell you if a specific repair might affect a warranty claim before we proceed.
Once a year in a Fort Worth household that runs four or more loads a week, and once every eighteen months for lighter use. Homes with large dogs, long hair, or a lot of blankets and towels should lean toward the once-a-year schedule. A Nikro vent that’s gone too long shows the same signs as any other: clothes taking longer to dry, a hot dryer exterior, or a burning smell during a cycle. We’ll inspect and tell you honestly whether it needs doing, not sell you a schedule you don’t need.
Yes, in nearly every case. We carry common Nikro-compatible caps and dampers on the truck, so if we find a crushed louver or a stuck damper during your cleaning, we can usually fix it right then for a pre-quoted price. If you have a less common Nikro model that needs a factory part, we’ll order it and schedule the install when it arrives. Call (682) 432-0424 and we’ll tell you what’s feasible for your specific vent.
Because they’re built to get a van in your driveway and expand once the technician is inside. A quote that’s too cheap usually means a per-vent upcharge, a hard sell on unnecessary sanitizing, or a crew that rushes through in forty minutes. We give one flat price per system in writing before any work starts, and that’s the number on the invoice. No surprise line items. That’s the whole idea behind the 365-Day Done Right Promise: if the job wasn’t done right, we come back until it is.
We do. Small apartment buildings, duplexes, and houses with two dryers in Fort Worth are all work we handle, and we’ll quote the whole system as one price. We’ll check each dryer connection, the shared vent run, and every Nikro component along the way. The written price covers everything we find during the inspection, so you’ll know the total before we start.
We don’t recommend it. A restricted vent makes the dryer work harder and hotter than it’s designed to, which shortens the life of the appliance and, in the worst case, can create a fire risk. If you suspect a clog, stop running the dryer and give us a call at (682) 432-0424. We’ll get out, check the vent, and tell you honestly what it needs.
Written by Paul Adeyemi, Owner, Morton’s Air Duct Fort Worth at Mortons Air Duct Fort Worth, serving Fort Worth and nearby areas.