Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Coil Cleaning: The Fort Worth Owner’s Guide
If your Abatement Technologies air handler or portable HEPA unit isn’t cooling like it used to, the evaporator coil is almost always the culprit, and a proper coil cleaning restores efficiency fast. In Fort Worth, professional Abatement Technologies coil cleaning typically runs $180 to $420 depending on access and how badly the coil has fouled, and we carry the right cleaners and tools on our trucks to handle it same-visit. Owners usually discover the problem when the unit runs longer cycles but delivers weak airflow, or when a faint sour smell comes off the coil after months of North Texas humidity and dust settling into the fins.
Key Takeaways
- We’re an independent Fort Worth service provider that stocks Abatement Technologies-compatible coil cleaning supplies. We’re not affiliated with Abatement Technologies, and we’ll tell you exactly what’s on the truck before we start.
- Most Abatement Technologies coil fouling in Fort Worth is a mix of cottonwood, construction dust, and humidity-driven biofilm, not just plain dirt.
- Every coil cleaning quote here is a written price before work starts. No add-ons after the fact.
- Paul Adeyemi and the Morton’s crew protect floors with shoe covers and drop cloths on every single visit.
Which Abatement Technologies Models This Applies To
Abatement Technologies makes two families of equipment that show up in Fort Worth homes and clinics: their portable HEPA air scrubbers like the HEPA-AIRE series (the PAS1200, PAS2400, and the smaller H2000 units) and their duct-mounted or in-line filtration systems paired with residential air handlers. For coil cleaning on a portable unit, the part we’re servicing is the fin-and-tube coil inside the cabinet, which pulls air across refrigerant lines and sheds heat. On those portables, the coil sits behind a filter rack, and over time the filter seal degrades just enough to let fine dust bypass and pack into the fins. That’s the number one reason these coils fail early – not the coil itself, but the filter housing letting Texas dust through.
On Abatement Technologies duct-mounted systems paired with a residential HVAC air handler, the coil in question is typically the evaporator coil sitting downstream of the blower. Abatement specifies certain coil face velocities and fin spacing for their filtration systems, and that matters when we choose a cleaner. A foaming alkaline cleaner will strip the antimicrobial coating some Abatement coils ship with, so we use a pH-neutral, non-foaming cleaner on those units. That’s the compatibility gotcha most Fort Worth owners never hear about: the wrong cleaner works once, then the coil fouls twice as fast because the protective coating is gone. OEM replacement parts for these coils are available through Abatement’s distributor network, but in our experience a properly cleaned and sealed original coil outlasts an aftermarket coil that doesn’t quite match the fin density. We stock OEM-spec cleaners and can source Abatement-branded replacement coils when a coil is beyond saving, but we’re honest when a clean is all it needs.
Styles & brands we work with
Signs Your Abatement Technologies Coil Cleaning Is Failing
- Weak airflow with the unit set to high. When the coil face loads up with a mat of dust and biofilm, air can’t get through the fins. The blower is working, but the air coming out of the registers feels soft and thin. This is the earliest and most reliable signal.
- Longer run times with no change in room temperature. A fouled coil can’t transfer heat efficiently, so the unit keeps running to hit the same setpoint. Your electric bill in a Fort Worth July will show it before anything else does.
- A sour, musty smell when the fan kicks on. North Texas humidity condenses on the coil, and when that moisture mixes with trapped dust and pet dander, it feeds microbial growth. The smell is the coil telling you it needs more than a filter change.
- Water staining or drips below the unit. When a coil is so loaded that condensate can’t drain properly, water backs up and finds a new path. In a Fort Worth home with a portable unit in a closet or hallway, that drip shows up on flooring or baseboard.
- The unit freezes up on humid days. A severely restricted coil drops the refrigerant temperature too low, and humidity turns to ice on the fins. If you see frost forming, turn the system off and call us. Running it frozen can damage the compressor, and that’s a much more expensive fix than a coil cleaning.
Replacement Cost & What’s Included
In Fort Worth, expect to pay between $180 and $420 for a professional Abatement Technologies coil cleaning, with most homes landing in the $225 to $300 range. The price depends on three things: how accessible the coil is (a portable HEPA-AIRE unit on casters is quick work; a duct-mounted coil in an attic crawl on a 100-degree day takes longer), how badly the coil is fouled (biofilm removal adds a step), and whether we’re also replacing the filter housing seal that let the dust through in the first place. We quote one flat price per system before we touch anything, and that price includes the coil cleaner, the cleaning itself, fin straightening if needed, a check of the drain pan and condensate line, and a before-and-after photo so you can see the work was actually done. The 365-Day Done Right Promise covers the coil cleaning too: if the coil re-fouls within a year because we missed something, we make it right at no charge. You’ll know the cost before the van shows up.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can absolutely check your air filter and replace it if it’s loaded. That’s true for both the portable Abatement units and any whole-home system, and we’d rather have you do that regularly than have us out for a cleaning the filter would have prevented. What we don’t recommend is pulling the cabinet apart to get at the coil yourself. On Abatement portable units, the coil sits behind a sealed panel with electrical connections nearby, and the fin surface is soft aluminum that bends if you look at it wrong. A bent fin is a permanent airflow restriction until it’s straightened with the right comb. On duct-mounted coils, you’re dealing with refrigerant lines that shouldn’t be moved and a drain pan that cracks if leaned on. The electrical disconnect is real, and so is the fin damage risk. If you suspect the coil is fouled, call us at (682) 432-0424 and we’ll be straight with you about whether a cleaning will solve it or whether something bigger is going on.
FAQs
With regular filter changes and a coil cleaning every two to three years, an Abatement Technologies coil should last the life of the unit, typically 12 to 15 years in North Texas conditions. The coil itself rarely fails; what fails is the filter seal and the maintenance around it. Call (682) 432-0424 if you’re not sure when yours was last cleaned.
Most fouled coils can be fully restored with a proper cleaning, including biofilm removal and fin straightening, and we’ll always clean before we recommend replacement. A coil that’s been cleaned but still won’t transfer heat is rare and usually means internal corrosion or a refrigerant leak, and that’s when we’ll talk about OEM replacement options. We’ll show you the before-and-after photos so the decision is based on what we both can see.
On a portable HEPA-AIRE unit, the cleaning takes 45 to 90 minutes. On a duct-mounted Abatement coil paired with a residential air handler, plan for two to three hours including setup, cleaning, drain check, and clean-up. We’ll give you a time window when you book, and we’ll tell you if the coil condition changes that estimate once we open it up.
Yes. We keep pH-neutral coil cleaners, fin combs, filter housing seals, and drain pan tablets on our trucks, and we can typically complete an Abatement Technologies coil cleaning in one visit. If a replacement coil is genuinely needed, we’ll order the OEM part and schedule the install for a second visit. We also stock parts for Lennox, Trane, and Carrier systems, so if you have mixed-brand equipment in the house we can handle it in one call.
Call Morton’s for Your Abatement Technologies Coil Cleaning in Fort Worth
If your Abatement Technologies unit is running weak, smelling off, or freezing up, call us at (682) 432-0424 for a straight answer and a free estimate. We’ll tell you what we’ll do and what it costs before we start, and Paul Adeyemi’s rule applies: we tell you what we’ll do, and then we do exactly that. Nothing more on the invoice, nothing less in the work. Our techs wear shoe covers, lay down drop cloths, and take a photo of the clean-up before leaving. A live person answers the phone around the clock, so call when it’s convenient for you.
Written by Paul Adeyemi, Owner, Morton’s Air Duct Fort Worth at Mortons Air Duct Fort Worth, serving Fort Worth and nearby areas.