Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Fort Worth Homeowners Choose Trane Air Duct Cleaning
We’re an independent air duct cleaning and service provider in Fort Worth, and we work on more Trane residential systems than any other shop of our kind in the area. Our techs have specialized training on Trane’s coil and blower cabinet designs, which means we know exactly where dust hides, where mold grows, and where air leaks happen in these specific machines. This is not a brand-agnostic duct crew that happens to own a vacuum. It’s a team that has pulled apart enough Trane Hyperion air handlers and Comfort Coil cabinets to know their quirks by feel. We are not affiliated with or authorized by Trane, and we’ll say that plainly from the start.
If you need Trane repair in Fort Worth, call (682) 432-0424 for a written quote before any work begins. Paul Adeyemi, our owner, will tell you exactly what the job involves and what it costs before a single register is touched.
Why Trust Mortons Air Duct Fort Worth for Your Trane Air Duct Cleaning?
Paul Adeyemi got his start in HVAC and duct work through the sheet metal and air conditioning program at Los Angeles Trade-Technical College, then spent well over a decade cleaning duct systems across Fort Worth, from older ranch-style homes near the TCU campus to newer builds in the Wedgwood area. He’s seen the inside of Trane systems that have been neglected for twenty years and Trane repair in Arlington systems that were installed six months ago and already need attention. That range matters when you’re trying to diagnose whether a problem is the ductwork, the coil, or the blower.
Our Fort Worth crew has seen every Duracurve and Comfort Coil configuration Trane makes. We know that Trane’s Spine Fin condenser coils, that all-aluminum coil design, collect fine dust in a way that flat-tube coils don’t. We know the closed-cell foam insulation inside Hyperion air handlers holds moisture differently than fiberglass-lined cabinets. And we know the Comfort Coil cabinet’s breakaway flanges are a common source of bypass air when a previous contractor didn’t seal them properly. That’s the knowledge you pay for, and it’s why our Trane work isn’t just a generic duct cleaning with a logo on the invoice.
We carry OEM Trane filters and gaskets when they’re available. For duct sealing and insulation, we choose commercial-grade mastics and flex rated for Trane’s static pressure, because the wrong material on a variable-speed system creates its own problems.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Fix in Fort Worth
Fort Worth’s climate is hard on HVAC systems. Six-plus months of air conditioning every year, frequent dust storms from the west, and red clay soil particles that find their way into return plenums. Here’s what we typically find in Trane equipment around Fort Worth:
- Dust-packed Spine Fin coils on Trane XV18 and XV20i outdoor units. The all-aluminum Spine Fin design is efficient, but the tightly packed fins trap fine dust and pollen. In Fort Worth’s dusty summers, a Spine Fin coil can lose noticeable airflow in a single season. We clean these gently with low-pressure water and coil-safe cleaners. High pressure will fold the fins over, and once folded, they don’t unfold.
- Mold in Hyperion air handler insulation. Trane’s Hyperion and TAM9 air handlers use closed-cell foam insulation inside the cabinet. It’s better than fiberglass for thermal performance, but when drain pans clog or humidity sits inside the cabinet, mold can grow on the foam surface. A musty smell when the AC first kicks on is the tell. We clean this with Trane-safe antimicrobial products, not bleach, and we check the drain line while we’re in there.
- Bypass air from Comfort Coil breakaway flanges. The Comfort Coil cabinet is designed so installers can break away flange sections to fit different duct layouts. The problem is that those breakaway points often aren’t sealed well, and conditioned air leaks into the attic or chase. In Fort Worth homes on expansive clay soil, foundation movement makes those gaps worse over time. We seal them with commercial mastic and test static pressure after.
- Variable-speed blower dust buildup on XV20i and S9V2 systems. Variable-speed motors run at different RPMs throughout the day, and when dust accumulates on the blower wheel, the system compensates poorly. Homeowners notice weak airflow at certain speeds or a faint hum. We pull the blower assembly, clean the wheel and housing carefully, and check the motor for signs of bearing wear.
- Construction debris in flex ducts on newer Trane installs. This one shows up constantly in Fort Worth’s newer suburban tracts on the north and west sides. Builders leave drywall dust, sawdust, and sometimes actual scrap in the flex ducts, and the first owner breathes that for years. We run camera scopes through returns and supplies, find the debris, and remove it. The camera footage before and after is yours to see.
Trane Parts & Our Repair-vs-Replace Approach
We use genuine Trane parts when they matter: filters, gaskets, and any component that touches the sealed cabinet. For duct sealing, insulation, and flex replacement, we choose materials rated for Trane’s static pressure rather than whatever is cheapest at the supply house. The distinction matters. A cheap flex duct with high friction loss on an XV20i variable-speed system turns a quiet, efficient machine into a noisy, inefficient one.
Our repair-vs-replace stance is simple. We quote a repair first whenever it makes sense. If a Trane heat exchanger or coil is beyond cleaning, we’ll show you the camera footage that proves it, and we’ll recommend replacement without upselling you into a system you don’t need. If we can clean it and it’ll run right, we’ll tell you that too. One of our techs on a Trane XR16 with a TAM9 air handler in a Crowley Park home found the blower wheel caked with dust after a remodel. We pulled the blower assembly, cleaned the wheel and housing, then fogged the evaporator coil with a Trane-safe cleaner. Static pressure dropped from 0.9 to 0.5 inches, and the homeowner said the system was silent for the first time in years. It didn’t need replacement. It needed someone who knew where to look. Call (682) 432-0424 if you want a straight answer on your Trane system.
Our Trane Service Process – Step by Step
- 1
Diagnosis. We start with a visual inspection and static pressure reading, then scope the ducts with a camera. On Trane systems, we specifically check the Comfort Coil flanges, the blower wheel, and the drain pan. We show you what we find before we touch anything.
- 2
Written quote. Before any work starts, you get a written price for the entire job. Not an estimate that becomes a surprise later. The number we write is the number you pay.
- 3
Repair or clean. We clean evaporator coils, blower assemblies, and duct interiors using professional equipment from Rotobrush and Nikro. Duct sealing uses commercial mastic rated for Trane’s static pressure. Shoe covers go on before we walk in, drop cloths protect your floors, and we work around nap schedules when we can.
- 4
Testing. After the job, we re-check static pressure and airflow at several registers. We want the numbers to match what a properly functioning Trane system should deliver, not just what it delivered when we arrived.
- 5
Warranty and documentation. Every job is backed by our 365-Day Done Right Promise. You get a photo of the clean-up before we leave. If it’s not done right, we make it right. Full stop.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in Fort Worth
We service the full range of residential Trane equipment: XV18 and XV20i variable-speed heat pumps and air conditioners, XR14 and XR16 single-stage units, S9V2 and S9X2 gas furnaces, and Hyperion and TAM9 air handlers. That covers most Trane systems in Fort Worth homes built from the 1990s through today. We stock common Trane filters and gaskets locally, and for larger parts we have relationships with supply houses across the metroplex. If it says Trane on the cabinet, we can likely help.
We Also Service These Brands
We’re not married to one manufacturer. Our Fort Worth techs also service Lennox and Carrier systems regularly, and we bring the same approach to those jobs: written pricing, careful work, and a clean-up photo before we leave. Trane is what we see most often around Fort Worth, but we’re comfortable in any equipment bay.
FAQs – Trane Air Duct Cleaning Service in Fort Worth
No. We are an independent service provider, not a Trane-authorized dealer or factory service center. That independence means we’re free to repair what can be repaired rather than steering you toward replacement equipment. It also means we choose parts and materials based on what works best for your system, not what a manufacturer program requires us to sell.
A musty smell when the AC first kicks on usually means mold or mildew on the closed-cell foam insulation inside the Hyperion cabinet, often caused by a slow drain or standing water that sat inside the unit. We clean the cabinet interior with Trane-safe antimicrobial products and clear the drain line. The odor usually clears within a day. Call (682) 432-0424 if you’re smelling it every time the system cycles.
Yes. The Comfort Coil’s fins are thin and easily folded by high-pressure air or aggressive brushing. We use low-pressure methods and soft-bristle tools around the coil, and we cover the cabinet opening when cleaning ducts to keep loosened debris from being blown across the fins. This is one of the first things our techs learn on Trane systems.
It could be either, which is why we start with static pressure readings and a camera scope. If static pressure is high and the filter is clean, the restriction is usually in the ductwork or the coil. If the blower wheel is dirty, it can’t move air efficiently at lower speeds. We diagnose before we clean anything, so you know what you’re paying to fix.
No. Using an independent provider like Mortons Air Duct Fort Worth does not void a Trane manufacturer’s warranty. Warranty coverage is tied to the equipment, not to who services it. We use Trane-compatible materials and follow safe practices around the coil and cabinet, so your warranty stays intact.
Trane air duct cleaning in Fort Worth typically ranges from $350 to $600 for a full system, depending on the size of the home, the number of returns, and whether coil cleaning or duct sealing is included. Smaller single-system jobs may run less; larger two-story homes with multiple returns run more. We give a written price before any work starts. Call (682) 432-0424 for an exact quote, no obligation.
Book Your Trane Service in Fort Worth, TX
If your Trane system needs duct cleaning, coil cleaning, blower cleaning, or duct sealing, call us at (682) 432-0424. A live person answers. We’ll talk through what you’re noticing, schedule a time that works for your household, and show up with a written price and a plan. Our Haltom City Trane service and Fort Worth work is backed by the 365-Day Done Right Promise and the Cedarwell Care Promise, and Paul Adeyemi stands behind every job we do.
Written by Paul Adeyemi, Owner at Mortons Air Duct Fort Worth, serving Fort Worth since 2005.