Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Fort Worth, TX | Mortons Air Duct Fort Worth
Air Duct Cleaning in Fort Worth for Trane systems costs $399 to $799 for a full system, depending on home size and how much debris has built up inside the ductwork. We’re Mortons Air Duct Fort Worth, and we’re the independent Trane specialist that Fort Worth homeowners call when they want their ducts cleaned, sealed, and documented with before-and-after photos. The difference here is that we actually know how Trane equipment behaves in Fort Worth houses: the tight new builds up north near Alliance, and the 1960s ranches in Wedgwood with original galvanized ductwork that’s been leaking for decades.
Paul Adeyemi owns Mortons Air Duct Fort Worth, and he’s been pulling construction debris out of flex ducts and sealing return plenums across this city since the mid-2000s. Our team works on Trane air handlers, coils, and full distribution systems every week. If you want an independent cleaning and sealing crew that respects your Trane system and your floors, call (682) 432-0424 for a written quote before any work starts.
We are not manufacturer-affiliated or authorized by Trane. We’re an independent Fort Worth service company that knows Trane equipment well enough to clean it properly, along with Trane sales & service insights, without stepping on your warranty.
Why Fort Worth Residents Choose Us for Trane Service
Most duct cleaning crews can run a vacuum through your vents. What they can’t tell you is why your Trane air handler in a Wedgwood ranch keeps pulling in attic insulation, or why the filter in your north Fort Worth new build clogs with white drywall dust every three weeks. We can. That’s the difference between generic duct cleaning and Trane-relevant work.
Paul grew up in Los Angeles and learned HVAC and duct work through the sheet metal and air conditioning program at Los Angeles Trade-Technical College before spending years cleaning systems across Fort Worth. He says it plainly: “I tell you what I’ll do, and then I do exactly that, nothing more on the invoice, nothing less in the work.” Our techs carry OEM Trane filters, gaskets, and seals for exact-fit jobs, plus proven aftermarket options when OEM pricing doesn’t make sense. Every visit includes shoe covers, drop cloths, and a written price before anything turns on.
We’re part of the Cedarwell family of independently owned companies, and every job we do carries the Cedarwell Care Promise. That’s not a marketing line. It means our background-checked, uniformed techs protect floors and furniture, work quietly during nap hours, use pet-safe products where available, and show you a photo of the final clean-up before the van leaves.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Fort Worth
Here’s what we find in Trane systems around this city, and why it happens here specifically.
- Construction debris in flex ducts on newer Trane builds. Fort Worth’s north and west suburban boom has produced thousands of tightly built homes with RunTru by Trane or Trane XR14 systems. Drywall dust, sawdust, sometimes even fast-food wrappers get left inside flex ducts during construction. That debris clogs Trane filters and blower wheels within the first year.
- Leaky return ducts in Wedgwood and TCU ranches. Homes built in the 1950s-70s often still have original galvanized ducts. The joints were sealed with tape and mastic that’s failed. Every AC cycle pulls blown-in insulation and fine dust from the attic into your Trane air handler, coating the evaporator coil.
- Undersized returns on 1990s-2020s Trane systems. Many production homes around Fort Worth were built with returns that are simply too small for the Trane air handlers they carry. High static pressure strains the blower motor and causes whistling registers. Cleaning helps, but sealing and sometimes adding return capacity is the real fix.
- Condensation and mildew in Trane air handler cabinets. Fort Worth summers are hot and humid, and spring thunderstorms add moisture. We regularly open Trane TEM8 and TAM9 air handler cabinets to find dark mildew starting where condensation sat. Duct cleaning alone won’t cure that. The cabinet, plenum, and coil need attention too.
- Red clay dust throughout the system. Dust storms off the plains push fine red clay particles into homes. Once inside, that dirt works its way through ducts and settles on blades, coils, and registers. It’s abrasive, and it makes your Trane blower work harder than it should.
Trane Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s something you won’t hear from a technician in Dallas or Plano. Fort Worth’s Wedgwood and TCU neighborhoods sit on expansive clay soil. That soil swells when it rains and shrinks during dry spells, and the foundation movement opens gaps in duct joints that original mastic simply cannot hold. Our crews routinely find blown-in insulation and attic dust being pulled into Trane returns every time the AC kicks on during summer. In a single season, a galvanized return joint can open just enough to turn your Trane air handler into a vacuum for everything in the attic. That’s why we don’t just clean ducts in these older Fort Worth neighborhoods-we also offer Fort Worth Dryer Vent Cleaning for complete home safety. We video-inspect the returns, find the failed joints, and seal them with mastic and mesh so the clean actually lasts. A duct cleaning without that sealing step is honestly just temporary relief for homes built on this soil.
We ran a video inspection on a Trane TEM8 air handler in a 1960s ranch off Trail Lake Drive in Wedgwood. The return plenum was pulling pink fiberglass from the attic through a failed duct joint every single AC cycle. Our crew sealed the joint with mastic and mesh, cleaned the blower cabinet, and installed a filter media upgrade. Dust complaints dropped by half within a week.
Trane Models & Products We Service in Fort Worth
We work on Trane TEM8 and TAM9 air handlers, XL16i and XR14 condensing units, S9V2 and S9X1 gas furnaces, and RunTru by Trane builder-grade systems. If your home has Trane equipment, we know the configuration.
For parts, we take a practical approach. OEM Trane filters, gaskets, and seals go in when exact fit matters. When OEM is overpriced or on backorder, we recommend proven aftermarket access panels, duct board, and mastic that hold up just as well. For older Trane units with failed blowers, coated coils, or cracked heat exchangers, we give you a straight repair-versus-replace quote based on age and accessibility, not on commission. Our local stock covers the parts most Fort Worth homes need, which means faster turnaround for most jobs.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Fort Worth
Air duct cleaning for a typical Fort Worth home runs $399 to $799. Smaller condos and apartments start around $299. Larger two-story homes with multiple returns and zoned systems can reach $899 or more. Add-ons like evaporator coil cleaning ($150 to $300), duct sealing ($200 to $500 depending on access), and video inspection ($75 to $150) are priced separately and shown to you in writing before work begins.
What drives cost here is access. Fort Worth’s older homes often have ducts in tight attics with low clearance, while newer suburbs have systems spread across larger square footage. A free estimate from us includes a written line-item price, not a range that changes when the van shows up. Call (682) 432-0424 and Paul or one of the team will walk you through exactly what your Trane system needs.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Fort Worth
That white dust is almost always drywall dust or texture overspray left inside flex ducts when the home was built. It sits in the ductwork and gets pulled into the filter every time the blower runs. Cleaning the ducts and the Trane air handler cabinet removes the source. Call (682) 432-0424 and we’ll confirm what’s actually in your ducts before quoting anything.
Yes. Cleaning alone won’t fix leaking joints in original galvanized ductwork. Those joints have failed from decades of attic heat and expansive clay soil movement. You need duct sealing with mastic and mesh, plus coil cleaning, to actually protect your Trane equipment. We do all three in one visit.
Yes. Most Trane TEM8 and TAM9 air handlers have an access panel that lets us reach the coil. We use coil-safe cleaners and a wet vacuum to remove buildup without damaging fins. If access is tight in an older Fort Worth closet installation, we may need to remove the panel and work carefully around the blower. We’ll show you the before and after.
It does. Dust storms from the west carry fine red clay particles that work their way into homes and ducts. Inside your Trane system, that dust coats the evaporator coil, reduces airflow, and strains the blower motor. Regular filter changes help, but duct cleaning is the only way to remove what’s already coating the system. Call (682) 432-0424 for a free estimate on a full cleaning and inspection.
No. Independent duct cleaning, when done properly, does not void the manufacturer warranty on Trane equipment. We use industry-approved equipment from Rotobrush and Nikro, follow NADCA standards, and document the work with photos. We are not Trane-authorized, but our cleaning and sealing methods protect your system rather than putting it at risk.
Service Areas Near Fort Worth
We serve Fort Worth service area and the surrounding communities. Our techs regularly work in Wedgwood, TCU, Ridglea, Alliance, and Saginaw. We also cover Trane service in Arlington and Trane service in Haltom City for homeowners who want the same Trane-relevant duct cleaning without calling a generic national chain.
Book Your Trane Service in Fort Worth Today
You’ll get a written price before any work starts, a live person on the phone, and a photo of the clean-up before we leave. Call (682) 432-0424. We’ll schedule your Trane duct cleaning at a time that works for your household, kids and pets included.
Written by Paul Adeyemi, Owner at Mortons Air Duct Fort Worth, serving Fort Worth since 2005.